Hanna Instruments (M) Sdn Bhd
11A, Jalan PJS 11/20,
Bandar Sunway,
46150 Petaling Jaya,
Selangor, Malaysia.
+603-5638 9940
Penang Branch Office
Hanna Instruments (M) Sdn Bhd
N0. 303-2-27, Krystal Point,
Jalan Sultan Azlan Shah,
11900 Sungai Nibong,
Penang, Malaysia.
+604-638 4558
+604-645 4558
penang@hannamalaysia.com
Sabah Branch Office
Hanna Instruments (M) Sdn Bhd
No. 4-1, 1st Floor,
Plaza Kingfisher,
Jalan Plaza Kingfisher 5,
Inanam, 88450 Kota Kinabalu,
Sabah, East Malaysia.
088-382 941
088-382 942
sabah@hannamalaysia.com
HI1090T Combination Glass-body pH Electrode - High Temperature, T-type Connector
| Previous | 7 / 44 | Next |
500 g
This combination glass-body pH electrode is designed for industrial applications with features such as a ground glass junction, high temperature glass, and T-type connection. With it's durable design, you can count on this electrode to stand up to your process environment.
- Combination glass-body pH electrode.
- Low temperature glass for fast stabilization and more accurate results at lower temperatures.
- Built for everyday, demanding use in industrial applications.
Combination electrode
- Single combined electrode that has both sensing and reference components for added convenience.
General purpose glass formulation.
- General purpose glass provides the best response over the entire pH range and can be used for a wide range of applications.
Ground glass junction
- Commonly used junction type because glass with the correct expansion coefficient is easily welded to the glass body allowing for proper electrolyte flow.
T-type connector
- Designed by Hanna to take advantage of both PG 13.5 thread and screw cap. The PG 13.5 thread ensures proper in-line installation while the screw cap allows for maximum versatility making it possible to connect a cable of different lengths.
Glass body
- Glass body electrodes are easier to clean, can withstand high pressure and high temperature applications, and offers high resistance to aggressive chemicals.
Double junction technology with gel polymer filling
- Ensure long electrode life and reliability in harsh environments.
General
| Junction / Flow Rate | Double, PTFE |
|---|
Specifications
| Junction Type/Flow Rate | Double, ground glass |
|---|---|
| Type of Electrolyte | Polymer |
| Body Material | Glass |
| Glass Type | (-5 to 95°C/ 23-203°F) |
| Matching Pin | No |
| Max. Pressure | 3 bar (43.5 psi) |
| Overall Length | 140mm |
| Temperature Sensor | No |
| Connector Type | T-type |
| Amplifier | No |
| Probe Mounting | PG 13.5 Thread |